Product Overview
Version 2.0 is here! The spindle adapters have been revised and the Quick Angle Kit is even better now. Improvements include:
- 2.0 Adapters have a profile and hardware change to allow much more clearance for the follow tie rod. We have recessed the bolt into the adapter and cut the adapter at an angle. This allows for at least 5-7° of clearance on the angle kit!
- The adapters now have tapered cones to locate them into the spindle, this provides an easier install and more protection against loose hardware.
- NO MORE DRILLING!!!! The spindle adapters now use a 1/2" bolt to mount at the tie rod location, and with the added cone features the new adapters are actually more secure and stronger than the old ones!
Already have control arms but want to upgrade to the quick angle adapters? This kit allows just that! Also good to just have some spares on hand.
The kit includes the adapters and all necessary hardware to mount them to the 96-04 spindles and a set of control arms that uses a spherical bearing / rod end ball joint.
These adapters add roll center correction, ackerman adjustment, and a shorter steering arm to get more angle from the steering rack. See the full quick angle kit for more info!
